| Title |
Publisher |
Price ▲ |
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and... [click here for more] |
Fat Dragon Games |
FREE
|
A simple Druid Stone objective marker to celebrate Feral Druid Games.
Carved or uncarved.
Supports required for the antlers.
... [click here for more] |
Feral Druid Games |
FREE
|
Welcome to Terrain Frames. A versatile and modular terrain system to take your games further.
Terrain Frames is a 3D printed terrain set that allows you to build and design the look and size of the game you want. This system has been designed from the ground up to not only be about customization, but to be fast and efficient on your printer. This system will allow you to spend less time on the printer... [click here for more] |
Casey Lowe |
FREE
|
Hello to our free samples of Grim Saeculum!
...for more information check our Website: http://www.grim-saeculum.com/ Complete Core Pack is here: Grim Saeculum - 3D printable Game (STL + PDF Files) - ESLO | Wargame Vault
NEW KICKSTARTER with new Adventures, miniatures, boards and many more...
Preview Link: https://www.kickstarter.com/projects/eslo/grim-saeculum-the-journey-continues-2-new-adventures?ref=849syx&token=a758e4c2... [click here for more] |
ESLO |
FREE
|
Intended to mount a miniature on top as a statue. The upper circle is 25mm. ... [click here for more] |
Feral Druid Games |
FREE
|
World War Tesla™ is an alternate-history wargame by James M. Ward (author of TSR's Gamma World, Deities & Demigods, and Metamorphis Alpha) and Thomas A. Tullis, where Nikola Tesla’s more radical ideas such as death rays and force fields have come to fruition, changing the face of a world at war. Giant walking tanks, soldiers with rocket-packs, and flying machines armed with... [click here for more] |
Fat Dragon Games |
FREE
|
Barrel Marker. Forget boring old disk markers, get an objective marker that looks good and makes sense. This console has been designed to be easily printed and to have lots of details for the painters out there. It wouldn't look out of place in any bunker or building and makes a great objective.
This set includes:
• Barrel Objective Marker
Print Settings:
Layer Size: 0.2mm,... [click here for more] |
SPQRWargames |
Pay What You Want
|
The Tree of the Dead. Comes in 3 pieces that slot together.
Hollowed tree filled with skulls.
Not really much else to say about it really.
Great with the Skull Pyramid and Skull Scatter Terrain. ... [click here for more] |
Devious Games |
$0.50
|
The Necroplex Dice Tower, a towering bastion of industrial decay and randomness! Prints in two parts, no supports needed, and small print bed friendly.
The top chimney is sized to fit a standard D20, or remove the top to roll fistfulls of dice at once.
... [click here for more] |
Hack Shack Games |
$0.95
|
Expand your Starship deck plans with this standing controls tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free... [click here for more] |
2nd Dynasty |
$0.97
|
This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create signs for other Packs in the series. These signs are made to fit the slots and tabs of the other buildings released and are double sided. ... [click here for more] |
Doctor Merkury's Lab |
$1.00
|
This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create signs for other Packs in the series. These signs are made to fit the slots and tabs of the other buildings released and are double sided. Also included is a Prone Token for gaming use. ... [click here for more] |
Doctor Merkury's Lab |
$1.00
|
This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create signs for other Packs in the series. These signs are made to fit the slots and tabs of the other buildings released and are double sided. Also there is a silo model for creating crowd markers. ... [click here for more] |
Doctor Merkury's Lab |
$1.00
|
This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create Building Facades for other Packs in the series. These Facades are made to fit the slots and tabs of the other buildings released. ... [click here for more] |
Doctor Merkury's Lab |
$1.00
|
This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create Building awnings for other Packs in the series. These awnings are made to fit the slots and tabs of the other buildings released. ... [click here for more] |
Doctor Merkury's Lab |
$1.00
|
This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create signs for other Packs in the series, most especially the Street Debris set. These signs are made to fit the slots and tabs of the other buildings released and are double sided. Also included is a garbage pile model. ... [click here for more] |
Doctor Merkury's Lab |
$1.00
|
The Goblin Gun is a fun little piece that is great on its own or even better when used inside the Wizard's Tower observatory.
Glue is required to keep it in place if you are using it on it's own, just a spot on the lower cog should keep it held tightly and then you can change the angle on the top part without need of glue. Some pieces are a tight fit so be careful when putting it together ... [click here for more] |
Devious Games |
$1.00
|
This STL files for 3D Printers will create a hex pattern for XPS foam. Each hex should be about 1/3 of an inch wide. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
This STL files for 3D Printers creates a hex pattern for XPS foam. Each hex should be about 13/16 of an inch wide. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
This STL files for 3D Printers creates a hex pattern for XPS foam. Each hex should be about 31/32 of an inch wide. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
IF YOU ARE SEEING THIS ITEM FOR SALE ON A SCAM SITE, DON'T BUY IT, YOU CAN GET IT FOR FREE AT THE WARGAME VAULT - www.wargamevault.com
These files are Creative Commons for your personal (NON-COMMERCIAL) use only CC BY-NC-SA 4.0.
Two options for the price of one! "Quick and Durty" multi-part explosion markers. PDF, AI and SVG patterns for producing 3D laser cut parts... [click here for more] |
Yellow Sign Studio |
Pay What You Want
|
This contains 2 files, a lean to to lean up against a building or wall and logs to go underneath it or elsewhere. ... [click here for more] |
Devious Games |
Pay What You Want
|
The Megahexes collection is a set of 22 3D-printable STL models designed for games needing a hex grid.
The hexagons are 1.75” center-to-center, and the hexagon sides are 1” long. All parts will fit on an Ender3 buildplate. A seven-hex “Megahex” requires a build footprint of 5” x 5.25”. The largest piece in the set, the rock bridge, is 8” x 5.25”.
The models make use of the Dragonbite... [click here for more] |
Decagon Design |
Pay What You Want
|
The Megahexes 1.5” Base Set is a set of 16 3D-printable STL models designed for games using a hex grid.
The hexagons are 1.5” center-to-center, and the hexagon sides are 0.866” long. All parts will fit on almost any 3D printer buildplate. A seven-hex tile (the largest in the set) requires a build footprint of approx. 4-3/8” x 4-5/8” (110mm x 115mm).
The models make use of the DragonbiteTM... [click here for more] |
Decagon Design |
Pay What You Want
|
The Megahexes 1.5” Expansion Set 1 has 41 3D-printable STL models that enhance the Megahexes 1.5” Base Set, adding risers to support elevated terrain, some megahex-sized terrain features, and hex-to-square-grid connectors.
The hexagons are 1.5” center-to-center, and the hexa- gon sides are 0.866” long. All parts will fit on almost any 3D printer buildplate. A seven-hex tile (the largest in... [click here for more] |
Decagon Design |
Pay What You Want
|
This STL files for 3D Printers creates a rolling pin with a running bond pattern of brick work. Each brick should be about an inch long and half an inch wide. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
Skull Scatter terrain. Great to fill out a dungeon and used in conjunction with the skull pyramid.
This comes with:
a large pile of skulls
A small pile of skulls
wall pile of skulls (fits flush to a wall)
corner pile of skulls (fits flush to a 90 degree corner)
Skeleton banner
... [click here for more] |
Devious Games |
$1.00
|
This is a small Guard House or a Toll Booth. Made in two pieces, the building and the roof.
This goes great with The Wizard's Tower as a minions small hut or with the Bridge or Walls sets as a Toll Booth or Guard House.
This also includes some altered files to use it as the entrance to your Wizard's Tower.
If you like this check out more things for sale.
... [click here for more] |
Devious Games |
Pay What You Want
|
This STL files for 3D Printers creates a rolling pin with a Versailles Tile Pattern. Each Versailles Tile Pattern should be about 3 inches square. The original pattern was created for the French court to not look like a repeating set of tiles. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
This is a well that will be great in the centre of a town or castle (especially Sir Cireneg's Castle, you should get that too!)
It also comes with a tentacle because we all want tentacles coming out of the well don't we? ... [click here for more] |
Devious Games |
Pay What You Want
|
This STL files for 3D Printers creates a rolling pin with a windmill pattern for XPS foam. Each windmill should fill about an inch of area. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
Expand your Starship deck plans with these special stairs and railing tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available... [click here for more] |
2nd Dynasty |
$1.27
|
Expand your Starship deck plans with this wall lockers tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from... [click here for more] |
2nd Dynasty |
$1.27
|
Here is a free sample of our upcoming 3D printable scenery range for Wargames and RPG.
You'll find enclosed stl files to print the model on any 3D printer.
This is a multi part model in 28mm scale that needs assembly as follow :
The recommended settings are for PLA printing on any entry level 3D printer, adapt as needed to your printer .
100 or 150 microns layer height
5% to 15% percent infill... [click here for more] |
Via Ludibunda |
Pay What You Want
|
ALPHA-TECH CITY brings you super-detailed 3D printable terrain for your 6mm sci-fi wargames. All models print without supports! ... [click here for more] |
Fat Dragon Games |
$1.99 $1.49
|
ALPHA-TECH CITY brings you super-detailed 3D printable terrain for your 6mm sci-fi wargames. All models print without supports! ... [click here for more] |
Fat Dragon Games |
$1.99 $1.49
|
Expand your Starship deck plans with these ladder well tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from... [click here for more] |
2nd Dynasty |
$1.49
|
Expand your Starship deck plans with these lift and platform tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free... [click here for more] |
2nd Dynasty |
$1.49
|
This is the first expansion to the Siege Works Basic Set, an set of parapets angled in 45°
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$1.50
|
This is the second expansion to the Siege Works Basic Set, an set of parapets angled in 90°
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$1.50
|
This is the 3rd expansion to the Siege Works Basic Set, a set of saps angled in 90°
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$1.50
|
This is the 4th expansion to the Siege Works Basic Set, a parapet angled in 90°
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$1.50
|
Console Objective Marker. Forget boring old disk markers, get an objective marker that looks good and makes sense.
This console has been designed to be easily printed and to have lots of details for the painters out there. It wouldn't look out of place in any bunker or building and makes a great objective.
The Console is scaled for popular 25-28mm gaming systems such as AT-43, WH40K, and... [click here for more] |
SPQRWargames |
$1.75
|
A model of a Dahlgren 9in gun, used in the ACW in verious roles as ship's armamant, fortification or siege wapon. ... [click here for more] |
Xerbath |
$1.80
|
Bring a point of difference to your next RPG session with HexTerra, a modular hex-based tile system for RPG terrain.
Hexes are elegant, eyecatching and somewhat more natural than squares. While squares are great for man-made environments, hexes provide more freedom of movement and layout options for natural environments.
This base set contains 36 files for 3D printing -... [click here for more] |
Crackpot Studios |
$1.94
|
Pilots Chair And Console Objective Marker. Forget boring old disk markers, get an objective marker that looks good and makes sense.
This console has been designed to be easily printed with minimal supports and to have lots of details for the painters out there.
It wouldn't look out of place in any bunker, spacecraft or building and makes a great objective. Highly detailed and functional... [click here for more] |
SPQRWargames |
$1.99
|
STL Files: high qualtiy SciFi Gothik ruin
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included (see pictures)
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm... [click here for more] |
ESLO |
$5.95 $1.99
|
Security Console Objective Marker. Forget boring old disk markers, get an objective marker that looks good and makes sense.
This console has been designed to be easily printed with minimal supports and to have lots of details for the painters out there.
It wouldn't look out of place in any bunker, spacecraft or building and makes a great objective. Highly detailed and functional it not only... [click here for more] |
SPQRWargames |
$1.99
|
This set contains a sledge for ammunition supply matching to the steam Gun howitzer
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$1.99
|
Warp Gate Portal Door Marker. Forget boring old disk markers, get an objective marker that looks good and makes sense.
This Warp Gate Portal Door Marker has been designed to be easily printed with minimal supports and to have lots of details for the painters out there. This comes as three files as it is available in three versions.
It wouldn't look out of place in any bunker, spacecraft... [click here for more] |
SPQRWargames |
$1.99
|
Log In 
